聚四氟乙烯  美国苏威 PTFE Algoflon® D 2510 F塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123

 
13549213581  肖生
 
 
低摩擦系数, 耐化学性良好, 涂敷应用
 
Algoflon® D 2510 F
聚四氟乙烯
Solvay Specialty Polymers
Technical Data
 
产品说明
 
Algoflon® D 2510 F是一种聚四氟乙烯 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。
 
Algoflon® D 2510 F的主要特性有:
• 耐化学品
 
• 耐热
 
Algoflon® D 2510 F的典型应用领域为:涂覆应用
 
总体
 
材料状态 • 已商用:当前有效
资料 1 •  Technical Datasheet
搜索 UL 黄卡 •  Solvay Specialty Polymers
供货地区 • 北美洲 • 欧洲 • 亚太地区
性能特点 • 低摩擦系数 • 耐化学性良好 • 耐热性,高
用途 • Impregnation Applications • 涂敷应用
外观 • 白色
形式 • Latex
 
物理性能 额定值单位制 测试方法
pH值 > 9.00 ASTM D4441
密度 1.51g/m³ ASTM D4441
平均颗粒尺寸 240nm 内部方法
充模分析 额定值单位制
布络克菲尔德粘度 - (20°) 25mPa•s
补充信息 额定值单位制 测试方法
Non Ionic Surfactant - (on the mixture) 3.0wt% ASTM D4441
PTFE Content - (on the mixture) 60.0wt% ASTM D4441
Processing
 
• Algoflon® D 2510 F is processed according to methods generally used for conventional impregnation technology. Generally the procedure involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering above the crystalline melting point of the coated resin may be carried out to obtain the finished coated articles. Multiple passes may be required to obtain the desired PTFE load and coating thickness.
 
• Algoflon® D 2510 F can be processed neat or appropriately formulated. Also, it can be used diluted using distilled or deionized water. Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates.
 
Storage and Handling
• Algoflon® PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
 
• Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to avoid contamination, it is recommended to keep the containers closed when not in use.
 
Safety and Toxicology
• Before using Algoflon® PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
 
• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes.
 
• See Material Safety Data Sheet for detailed advice on waste disposal methods.
 
Packaging
• Algoflon® D 2510 F is packaged in either 30 kg drums or 1500 kg IBC's.
 
Additional Technical Information
• For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative, or contact us by e-mail.
 
 
 
 
 
聚四氟乙烯 美国苏威  PTFE  Algoflon® D 2510 F塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581  肖生