铁氟龙/美国苏威/PTFE/F 5/S/耐化学性良好/FDA/粉状

产品分类

联系我们

QQ在线

聚四氟乙烯美国苏威 PTFE Algoflon® F 5/S塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

13549213581 肖生

耐化学性良好, FDA, 粉状

Algoflon® F 5/S

聚四氟乙烯

Solvay Specialty Polymers

Technical Data

产品说明

Algoflon® F 5/S是一种聚四氟乙烯 (PTFE)材料,。该产品在北美洲、欧洲或亚太地区有供货,。 Algoflon® F 5/S的主要特性为:耐化学品。

典型应用领域包括:

• 添加剂/色母粒

• 食品接触应用

总体

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet

搜索 UL 黄卡 • Solvay Specialty Polymers

供货地区 • 北美洲 • 欧洲 • 亚太地区

性能特点 • 耐化学性良好

用途 • Additive • 混合

机构评级 • FDA 21 CFR 177.1550

外观 • 白色

形式 • 粉状

物理性能额定值单位制测试方法

比重 2.16 ASTM D792

Bulk Density 410g/l ASTM D4894

平均颗粒尺寸 15µm 内部方法

收缩性 - Radial 3.1% ASTM D4894

机械性能额定值单位制测试方法

Elongation at Break 400%

Tensile Strength 44.0MPa ASTM D4894

补充信息

Processing

• Algoflon® F 5/S is used for preparing filled products based on PTFE resins. Prior to use, Algoflon® F5/S powder needs to be conditioned

above 19°C/66°F. In order to obtain fully homogeneous compounds, it is necessary to mix Algoflon® F 5/S and filler with high shear

systems.

• Temperature must also be controlled (should not rise above 40°C/104°F) during the mixing process to avoid agglomeration of PTFE and

generation of white spots.

• Algoflon® F 5/S based compounds are processed using normal compression moulding as similar to virgin fine cut PTFE.

Storage and Handling

• Algoflon® PTFE fine cut powders must be stored and handled carefully to achieve defect free compounds and items. Temperatures that are

too high should be avoided to prevent powder lumping and poor flow.

• Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin

drums closed and clean. Good housekeeping and careful handling are essential.

Safety and Toxicology

• Before using Algoflon® PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling

precautions.

• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapour extractor units should be

installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact,

• wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.

Do not smoke in areas contaminated with powder, vapour or fumes.

• See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

• Algoflon® F 5/S is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin.

Additional Technical Information

• For Material Safety Data Sheet or additional technical information consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com

13549213581 肖生