全氟烷氧基PFA 940HP Plus塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123

 
13549213581  肖生
 
抗溶解性, 流动性低, 高 ESCR(抗应力裂纹), 烟释放低,耐化学性, FDA食品接触, 良好的电气性能, 耐气候, 衬里, 管道, 液体处理, 吹塑成型, 树脂传递成型, 挤出, 压缩模塑, 注射成型
 
PFA 940HP Plus
全氟烷氧基
 
产品说明
 
For inventory control purposes product name may be followed by an X.
 
Products labeled PFA 940HP Plus and PFA 940HP Plus X are equivalent and all information in this document is applicable to both.
 
Typical Application
With a typical MIT folding endurance of 300,000* cycles, PFA 940HP Plus is designed to withstand repeated flexing and aggressive chemical stress-cracking agents. Applications for PFA 940HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is critical.
 
Description
PFA 940HP Plus is a premium fluoroplastic resin available in pellet form.  PFA 940HP Plus possess-es the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ® PFA HP grades with the added benefits of improved flex life (typical MIT flex of 300,000*) and chemical stress-crack resistance.  PFA 940HP Plus meets the increasingly stringent requirements for ultra-reliable and non-contaminating parts, as well as unmatched HCl permeation resistance. The improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Additionally, parts molded withPFA 940HP Plus have improved clarity and a smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for PFA 940HP Plus.
 
This special purpose resin has a relatively high melt flow rate (typical MFR of 16), which permits higher extrusion speed and easier processing. The enhanced resistance to environmental stress-cracking makes  PFA 940HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of  PFA 940HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. PFA 940HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.
 
With  PFA 940HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids and fluorosurfactants. Combined with excellent chemical, permeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated molecule end groups of PFA 940HP Plus can reduce contamination to protect process yields.
 
Properly processed products made from neat PFA 940HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance.
 
In a flame situation, products of PFA 940HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
 
PFA 940HP Plus meets the requirements of ASTM D3307, Type IV
 
总体
 
材料状态 • 已商用:当前有效
资料 1 •  Technical Datasheet (English)
供货地区 • 北美洲 • 欧洲
• 拉丁美洲 • 亚太地区
• High Purity • 流动性高 • 韧性良好
• 低摩擦系数 • 耐化学性良好
• 吸潮性差
性能特点 • 高 ESCR(抗应力裂纹) • 耐气候影响性能良好
• 烟释放,低
• 良好的电气性能 • 耐热性,中等
• 中等透明度
• 良好的柔韧性 • 热稳定性,良好
用途 • 衬里 • 管道 • 液体处理
形式 • 颗粒料
加工方法 • 挤出 • 压缩模塑
• 树脂传递成型 • 注射成型
物理性能 额定值单位制 测试方法
比重 2.14g/cm³ ASTM D792
 
PFA 940HP Plus
全氟烷氧基
物理性能 额定值单位制 测试方法
熔流率 (372°C/5.0 kg) 16g/10 min ASTM D3307
ISO 12086
吸水率 (24 hr) < 0.030% ASTM D570
机械性能 额定值单位制 测试方法
抗张强度 ASTM D3307
23°C 28.0MPa ISO 12086
200°C 11.0MPa
伸长率 ASTM D3307
断裂, 23°C 310% ISO 12086
断裂, 200°C 450%
弯曲模量 ASTM D790
23°C 650MPa ISO 178
200°C 60.0MPa
硬度 额定值单位制 测试方法
硬度计硬度 (邵氏 D) 55 ASTM D2240
ISO 868
热性能 额定值单位制 测试方法
熔融温度 290°C ASTM D4591
电气性能 额定值单位制 测试方法
体积电阻率 1.0E+18ohm•cm ASTM D257
ISO 1325
介电强度
0.250 mm 3 80kV/mm ASTM D149
0.250 mm 80kV/mm IEC 60243-1
介电常数 (1 MHz) 2.03 ASTM D150
IEC 60250
耗散因数 (1 MHz) < 0.00020 ASTM D150
IEC 60250
可燃性 额定值单位制 测试方法
UL 阻燃等级 4 V-0 UL 94
极限氧指数 > 95% ASTM D2863
ISO 4589-2
补充信息 额定值单位制 测试方法
Critical Shear Rate (372°C) 56.0sec^-1
MIT Folding Endurance 5 (200.0 µm) 3.0E+5Cycles ASTM D2176
Weather and Chemical Resistance: Outstanding
 
 
 
 
 
全氟烷氧基 PFA 940HP Plus塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581  肖生