全氟烷氧基 PFA 340塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123

 
13549213581  肖生
 
抗溶解性, 流动性高, 高 ESCR(抗应力裂纹), 烟释放低, 半导体模制化合物,耐化学性, FDA食品接触, 良好的电气性能, 耐气候, 薄膜, 管道, 电线电缆, 绝缘材料,吹塑成型, 树脂传递成型, 挤出, 压缩模塑, 注射成型
 
PFA 340
全氟烷氧基
 
产品说明
 
For inventory control purposes product name may be followed by an X.
 
Products labeled PFA 340 and PFA 340 X are equivalent and all information in this document is applicable to both.
 
Typical Application
Applications for PFA 340 include extruded tubing and other profiles for hose, wire and cable insulation, and sleeving; industrial film; and injection or compression molded articles requiring superior electrical, chemical, and thermal properties.
 
PFA 340 is a general-purpose fluoroplastic resin available in pellet form. Compared with other grades of Teflon ® PFA, its most unique features are a relatively high melt flow rate (typical MFR of 14) and properties that make it suitable for a variety of processes and demanding end uses. Table 1 shows the typical property data for PFA 340.
 
PFA 340 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of PFA 340 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ® PFA 340 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.
 
Properly processed products made from neat  PFA 340 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
 
In a flame situation, products of PFA 340 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
 
PFA 340 meets the requirements of ASTM D3307, Type I
 
总体
 
材料状态 • 已商用:当前有效
资料 1 •  Technical Datasheet (English)
UL 黄卡 2 •  E54681-244681
供货地区 • 北美洲 • 欧洲
• 拉丁美洲 • 亚太地区
• 低摩擦系数 • 流动性高 • 韧性良好
• 良好的电气性能 • 耐化学性良好
性能特点 • 良好的抗蠕变性 • 耐气候影响性能良好 • 吸潮性差
• 良好的熔体强度 • 耐热性,中等 • 烟释放,低
• 良好的柔韧性 • 热稳定性,良好
• 薄膜 • 管道 • 型材
用途 • 电线电缆应用 • 管道
• 工业领域: • 绝缘材料
形式 • 颗粒料
加工方法 • 挤出 • 压缩模塑
• 树脂传递成型 • 注射成型
物理性能 额定值单位制 测试方法
比重 2.15g/cm³ ASTM D792
熔流率 (372°C/5.0 kg) 14g/10 min ASTM D3307
ISO 12086
吸水率 (24 hr) < 0.030% ASTM D570
机械性能 额定值单位制 测试方法
抗张强度 ASTM D3307
23°C 25.0MPa ISO 12086
250°C 12.0MPa
 
PFA 340
全氟烷氧基
机械性能 额定值单位制 测试方法
伸长率 ASTM D3307
断裂, 23°C 300% ISO 12086
断裂, 250°C 480%
弯曲模量 ASTM D790
23°C 590MPa ISO 178
250°C 55.0MPa
硬度 额定值单位制 测试方法
硬度计硬度 (邵氏 D) 55 ASTM D2240
ISO 868
热性能 额定值单位制 测试方法
熔融温度 305°C ASTM D4591
电气性能 额定值单位制 测试方法
体积电阻率 1.0E+18ohm•cm ASTM D257
ISO 1325
介电强度
0.250 mm 4 80kV/mm ASTM D149
0.250 mm 80kV/mm IEC 60243-1
介电常数 (1 MHz) 2.03 ASTM D150
IEC 60250
耗散因数 (1 MHz) < 0.00020 ASTM D150
IEC 60250
可燃性 额定值单位制 测试方法
UL 阻燃等级 5 V-0 UL 94
极限氧指数 > 95% ASTM D2863
ISO 4589-2
补充信息 额定值单位制 测试方法
Critical Shear Rate (372°C) 50.0sec^-1
MIT Folding Endurance 6 (200.0 µm) 1.5E+4Cycles ASTM D2176
Weather and Chemical Resistance: Outstanding
 
 
 
 
全氟烷氧基PFA 340塑料是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
 
13549213581  肖生